您当前位置:大象门业设备厂 > 产品中心

产品中心

产品名称:工业提升门/电动滑升门DX-T08
    

工业提升门

设计标准尺寸(宽×高)为:

最小:2000mm×2100mm

最大:10000mm×15000mm

/闭门速度约为:0.2m/s

门板均采用0.5mm镀铝锌彩色钢板,表面烤漆处理,厚度为40150mm

门板发泡密度≥42kg/m3,发泡材料采用美国亨斯迈聚氨酯系统料

门板采用凹槽设计板型,厚度为40mm,高度为500mm

采用2mm厚宝钢产热镀锌钢板成型压制而成,C型轨道

采用计算机设计扭簧平衡系统,可保持门体运动平稳、开启顺畅

弹簧材料为60Si2Mn,油淬火材料,循环使用寿命达30 000次以上

滑升门底部U型密封条,侧部和顶部为快速嵌入式密封条

工业提升门提升方式包括:标准提升方式、高位提升方式及垂直提升方式

可选配置包括:采光窗通行小门电机、手动链轮、安全气囊及装卸平台互锁开关等


Designed to fit an opening size of (Wide×High)

Min: 2000mm×2100mm

Max: 8000mm×6000mm
Open/Close speed: 0.2m/s

0.5mm colored galvanized steel sections with 2530μm thick baking finished facing

Foaming density≥42kg/m3, with Huntsman polyurethane core

Pinch-resistant door panel is 40mm thick and 500mm high

2mm C profile track, press formed by Baosteel hot-dipped galvanized steel

Computer designed torsion counterbalance system can provide smooth door operation

Torsion counterbalance springs are 60Si2Mn, oil tempered spring wire, providing a minimum 30,000 cycles

Bottom astragal is U profile, side and top are quick-set-in weatherseals

Track design shall be standard lift, high lift and vertical lift

Option could be: vision window, pass door, motor, chain hoist, pneumatic safety device, leveler interlock switch, and etc


其它详情:|车库门设备|遥控车库门|工业提升门|工业平移门|电动折叠门|相关资讯
Other elephant door product details please click the link above to enter

就在您身边的服务
工程实例